Leaking shower hose? You need these solutions

I believe everyone is familiar with the shower tube. Although it is not an important item, it is impossible to have it without a shower. However, the shower tube is the most problematic. It is very annoying that the shower does not flow smoothly when taking a shower. It is also a very common thing to leak water in the bathroom shower and connected pipes. There are many reasons and solutions are not the same. Today, the editor will introduce the reasons and solutions for the leak of the shower hose in detail

image.png
I believe everyone is familiar with the shower tube. Although it is not an important item, it is impossible to have it without a shower. However, the shower tube is the most problematic. It is very annoying that the shower does not flow smoothly when taking a shower. It is also a common thing that the bathroom shower and the connected pipes leak. There are many reasons and the solutions are different. Today, the editor will give you a detailed introduction to the cause and solution of the leak in the shower hose.

Reason one, rust and corrosion

Many showers on the market are made of cast iron, which is very susceptible to rust and corrosion, which in turn causes water leakage.

Solution: When choosing a shower hose, we must choose a material that is not easy to rust, such as copper or stainless steel, so that the shower is not easy to leak, and the service life is relatively long.

Reason two, clogged shower

Now the water quality is getting worse and worse, the water contains a lot of alkali and other impurities, and it is easy to accumulate in the water outlet of the shower over time, causing water leakage in other places.

Solution: Clean up the accumulated impurities in the shower head, and completely eliminate the scale that blocks the water outlet.

Cause three, rubber ring deformation

The pipe under the shower is also a common area of ​​water leakage. The shower pipe is usually a rubber hose wrapped in the outer metal shell. If installed improperly, the rubber ring of the hose will be deformed, and the outlet pipe joint will be uneven, making the water pipe leak.

Solution: Select the appropriate hose and shower according to the specifications, replace the rubber ring, and reinstall.

Reason four, hose rupture

Knowing that everyone finds out, the hose is easily broken. If water leakage occurs in the middle of the hose, it goes without saying that the hose must be broken.

Solution: In this case, the old hose needs to be removed and replaced with a new hose.

In daily life, we should also pay attention to the maintenance of the shower hose, that is, to keep the shower hose in the state of natural stretching during the shower, and do not let it go around three circles on the left and three circles on the right; After that, put the spray head back on the shelf, and don't wrap the hose around the shower head. Finally, don't knot when pulling the hose. Use light force to avoid the hose from breaking or causing damage. In this way, the shower hose can be used longer.